60H2F Series stepping motor
Stepping Motor
步距角 Step Angle | 1.8° |
絕緣電阻 Insulation Resistancce | 500V DC 100MΩ Min |
絕緣強度 Dielectric Strength | 500V AC 50Hz 2mA 1Minute |
環境溫度 Ambient Temperature | -20~+40℃ |
溫升 Temperature Rise | 80K Max |
絕緣等級 Insulation Class | B |
產品性能參數(Electrical specification):
60H2F 雙極性
型號 | 機身長度 | 額定電壓 | 額定電流 | 繞組電參數 | 靜力矩 Static moment | 轉子慣量 | 電機質量 | ||||
@20℃ | Typ. | ||||||||||
mm | V | Amps | Ohms | mH | N.m | oz-in | g.cm2 | oz-in2 | Kg | Lbs | |
60H2F46-154 | 46 | 4.8 | 1.5 | 3.2 | 7.1 | 1.2 | 170 | 280 | 1.5 | 0.6 | 1.3 |
60H2F46-204 | 3.4 | 2.0 | 1.7 | 3.9 | 1.2 | 170 | 280 | 1.5 | 0.6 | 1.3 | |
60H2F46-254 | 3.0 | 2.5 | 1.2 | 2.7 | 1.2 | 170 | 280 | 1.5 | 0.6 | 1.3 | |
60H2F46-304 | 2.1 | 3.0 | 0.7 | 1.6 | 1.2 | 170 | 280 | 1.5 | 0.6 | 1.3 | |
60H2F56-204 | 54 | 4.2 | 2.0 | 2.1 | 6.8 | 1.8 | 255 | 450 | 2.5 | 0.83 | 1.8 |
60H2F56-254 | 3.75 | 2.5 | 1.5 | 4.8 | 1.8 | 255 | 450 | 2.5 | 0.83 | 1.8 | |
60H2F56-304 | 2.7 | 3.0 | 0.9 | 2.8 | 1.8 | 255 | 450 | 2.5 | 0.83 | 1.8 | |
60H2F56-404 | 2.0 | 4.0 | 0.5 | 1.4 | 1.8 | 255 | 450 | 2.5 | 0.83 | 1.8 | |
60H2F67-204 | 65 | 4.4 | 2.0 | 2.2 | 6.0 | 2.3 | 326 | 560 | 3.1 | 1.05 | 2.3 |
60H2F67-254 | 4.25 | 2.5 | 1.7 | 4.5 | 2.4 | 340 | 560 | 3.1 | 1.05 | 2.3 | |
60H2F67-304 | 3.3 | 3.0 | 1.1 | 3.0 | 2.3 | 326 | 560 | 3.1 | 1.05 | 2.3 | |
60H2F67-404 | 2.4 | 4.0 | 0.6 | 1.5 | 2.4 | 340 | 560 | 3.1 | 1.05 | 2.3 | |
60H2F87-204 | 86 | 5.6 | 2.0 | 2.8 | 9.2 | 3.2 | 455 | 900 | 4.9 | 1.4 | 3.1 |
60H2F87-254 | 5.0 | 2.5 | 2.0 | 6.9 | 3.2 | 455 | 900 | 4.9 | 1.4 | 3.1 | |
60H2F87-304 | 3.6 | 3.0 | 1.2 | 4.1 | 3.2 | 455 | 900 | 4.9 | 1.4 | 3.1 | |
60H2F87-404 | 2.4 | 4.0 | 0.6 | 2.0 | 3.2 | 455 | 900 | 4.9 | 1.4 | 3.1 |
以上產品可根據客戶要求定制。
Above Products can be customized according to customer requirement
外形尺寸(Dimension):
運行矩頻特性(Torque-frequency Characteristic):
注意:裝配時,須保證電機軸和負載軸的同心,嚴禁敲打,以免損壞電機。
Note: when installing the motor, must ensure that the motor shaft and load shaft concentric,never hit it, so as not to damage the motor.